Supply capacity assessment
Review existing supply, maximum demand and any network upgrade requirements.
FH COMMERCIAL ELECTRICAL SERVICES
Commercial high-power EV chargers
Supply capacity assessment, switchboards, cabling, charger installation and commissioning.
Request a quote ↗Plan your commercial charging installation
FH reviews your site, existing electrical supply and proposed charger capacity before confirming the installation scope.
Electrical installation
Plan switchboards, protection, cable routes and charger installation around your site.
Testing and commissioning
Complete electrical testing, charger commissioning and installation handover.
Commercial AC chargers · 7–44 kW
Shown by maximum combined unit power, from low to high. Dual 2 × 22 kW means up to 22 kW per port and 44 kW combined; vehicle AC charging capability and site capacity affect actual output.
Autel AC Single Premium · 7 / 22 kW
A single-port charger with a 5 m tethered cable, built-in 4G and touchscreen for workplaces, shared parking and residential sites.
| Power | Single-phase 7 kW / three-phase 22 kW |
|---|---|
| Supply | 400 V three-phase / 230 V single-phase · ±15% · 50/60 Hz |
| Model / SKU | EW22-C0550EA0002 / 106002560 |
| Connector | Type 2 · 5 m tethered cable |
| Residual current detection | AC 30 mA + DC 6 mA |
| Display | 5-inch LCD touchscreen |
| Connectivity | 4G · Ethernet · Wi-Fi · Bluetooth |
| Management | OCPP 1.6J / 2.0.1 |
| Dimensions (H × W × D) | 315 × 170 × 117 mm |
| Weight | Approximately 5.8 kg · linked datasheet |
| Protection | IP65 charger body · IK10 |
| Operating temperature | −30°C to +50°C |
| Warranty | JET Charge supply: 5 years from installation |
Final electrical ratings, protection and platform configuration are confirmed for the supplied variant. The five-year warranty is a JET Charge supply offer, subject to its terms.
Enquire about supply and installation ↗Autel MaxiCharger AC Ultra · 2 × 22 kW
Dual Type 2 sockets for two vehicles, with an 8-inch touchscreen and wall or optional pedestal mounting.
| Power | 2 × 22 kW · up to 44 kW total |
|---|---|
| Output current | 32 A per port · three-phase |
| Supply | 400 V ±15% · three-phase · 50 Hz |
| Connectors | 2 × Type 2 sockets · charging cables separate |
| Display | 8-inch HD touchscreen · 1280 × 720 |
| Connectivity | Bluetooth · Wi-Fi · Ethernet · RS485 · 4G configuration |
| Management | OCPP 1.6J · upgrade to 2.0.1 subject to supplier |
| Residual current detection | AC 30 mA + DC 6 mA |
| Protection | IP54 / IK10 |
| Dimensions (H × W × D) | 625 × 320 × 170 mm |
| Operating temperature | −40°C to +55°C |
| Warranty | 36 months · extension available |
Each vehicle can receive up to 22 kW, subject to its onboard AC charger and site capacity. RFID / APP authentication; bank card payment is optional and requires a compatible terminal and billing platform.
Enquire about supply and installation ↗Autel MaxiCharger AC Ultra Street · 2 × 22 kW
A freestanding dual-port AC unit for commercial parking, communities and fleets, suited to sites without a wall mounting location.
| Power | 2 × 22 kW · up to 44 kW total |
|---|---|
| Output current | 32 A per port · three-phase |
| Supply | 400 V ±15% · three-phase · 50 Hz |
| Connectors | 2 × Type 2 sockets · charging cables separate |
| Display | 8-inch touchscreen · 1280 × 720 |
| Connectivity | Wi-Fi · Ethernet · 4G · RS485 |
| Management | OCPP 1.6J / 2.0.1 · confirm firmware |
| Residual current detection | Type A 30 mA + DC 6 mA |
| Metering | Built-in MID meter · ±1.0% |
| Protection | IP54 / IK10 · linked datasheet |
| Dimensions (H × W × D) | 1467 × 310 × 200 mm |
| Operating temperature | −30°C to +50°C |
| Warranty | 36 months · extension available |
The linked datasheet lists IP54; the supplier page lists IP55. FH will confirm the delivered enclosure rating and payment options. Maximum combined output requires suitable site supply.
Enquire about supply and installation ↗Autel MaxiCharger DC Compact 50 kW dual-port pedestal charger
For community car parks, commercial premises and fleets. Two CCS2 connectors support simultaneous charging of two vehicles, with a compact body and 21.5-inch touchscreen.
Power ratings: Listed as the 50 kW range. JET Charge specifies this pedestal model at 40 kW rated and 47 kW maximum total output. Both connectors share charger power; this is not 47 kW per connector.
| Product range | 50 kW |
|---|---|
| Rated output (supplier) | 40 kW |
| Maximum total output | 47 kW |
| DC output voltage | 150–950 V |
| Maximum DC output current | 133 A |
| Connectors | 2 × CCS2 |
| Standard cable length | 5.5 m |
| AC supply | 400 V ±10% · 3P + N + PE · 50/60 Hz |
| Rated AC input current | 75 A · owner manual section 5.4.1 |
| Peak efficiency | 96% |
| Protection | IP54 / IK10 |
| Display | 21.5-inch LCD touchscreen |
| Connectivity | 4G / Wi-Fi / Ethernet |
| Management protocol | OCPP 1.6J |
| Charger body dimensions | 1000 × 550 × 265 mm |
| Warranty | 24 months / 24个月 |
Connection and protection data follow supplier-provided owner manual sections 5.4.1 and 5.7, received 16 October 2026. FH verifies site cabling for circuit length, installation method, derating, voltage drop and protection coordination.
Authentication, payment and operation
Supports APP and RFID authentication. Bank card and mobile payments depend on the selected payment terminal, operating platform and activation. RFID identifies users; it is not itself a bank card payment terminal. Remote management is supported; confirm OCPP 2.0.1 upgrade availability with the supplier.
This listing is for the pedestal version. The trolley / 125A plug text in the URL is not a confirmed configuration. FH will confirm installation connections, payment equipment and extended warranty options with the supplier.
Enquire about Autel DC Compact installation ↗X280 60 kW dual-port DC charger
Product reference: X280-F2-EU60-CC
For commercial car parks, community and fleet charging projects. FH can assess site supply, switchboard protection, cabling, installation and commissioning.
| Rated power | 60 kW |
|---|---|
| Charging connectors | 2 × CCS2 |
| Cable length | 4.5 m |
| DC output voltage | 150–1000 V |
| DC output current | 0–200 A |
| Peak efficiency | ≥95% |
| Power factor at full load | ≥0.99 |
| Input current (supplier specification) | 97 A (0–114 A) |
| Supply connection | 3P + N + PE |
| Connectivity | Ethernet / 4G |
| Management protocol | OCPP 1.6J |
| Vehicle communication | ISO 15118 / DIN 70121 |
| Display | 7-inch touch LCD / 7英寸触摸屏 |
| Protection | IP54 / IK10 |
| Operating temperature | −25°C to +50°C |
| Dimensions (W × D × H) | 700 × 400 × 1550 mm |
| Weight | 190 kg |
APP and RFID authentication; QR authentication, POS terminal and DC energy meter are optional. Billing and load management require configuration and commissioning for the selected system.
The rated charger power is 60 kW; dual connectors do not mean simultaneous 60 kW output per connector. Confirm power sharing and final configuration with the supplier. Actual charging speed depends on the vehicle and site.
Enquire about X280 installation ↗View specification sheet ↗ · JET Charge product information ↗
FH package · CORE Basic EV load management
The FH X280 commercial charging proposal includes CORE Basic configuration, alongside charger installation, electrical works and platform commissioning, tailored to the site.
- Single-zone charging load control coordinates multiple chargers within available electrical capacity.
- Built-in power meter and current transformers (CTs) rated up to 250 A.
- External 4G modem and SIM card, with Ethernet connectivity.
- 5-inch LCD; IP54 and IK08 protection for indoor or outdoor installation.
- Configuration and commissioning through the Illuminate platform.
Install CORE Basic within 3 m of its controlled distribution board, with a dedicated 30 mA Type A RCD on the supply circuit. Multi-zone sites or loads exceeding 250 A need a separately designed management configuration.
Customer subscription terms must be signed before platform activation. FH will explain ongoing service and subscription conditions in the formal proposal.
Enquire about the complete charging package ↗Autel MaxiCharger DH120 all-in-one charger
Manufacturer product image · click to enlarge
For commercial, community car park and fleet charging projects. The supplied datasheet lists 60 kW and 120 kW configurations; FH will confirm power, connectors, payment terminal and site supply with the supplier.
| Power configurations | 60 kW / 120 kW |
|---|---|
| Power adjustment granularity | 60 kW |
| DC output voltage | 150–1000 V |
| Output current (uncooled cable) | 200 A / maximum 300 A |
| Peak efficiency | 97% |
| Connector configurations | 2 × CCS2 / 1 × CCS2 / CCS2 + CHAdeMO |
| AC input | 400 V ±10% · 50/60 Hz |
| Supply connection | 3 phases + PE |
| Power factor | >0.99 |
| THDi | <3% |
| Display | 15.6-inch LCD + 2 buttons |
| Connectivity | Dual SIM 4G/5G · Wi-Fi · Ethernet |
| Cable length | 5 m · optional 7.5 m / 10 m |
| Standby power (screen off) | <50 W |
| Protection | IP54 / IK10 |
| Dimensions (W × D × H) | 620 × 250 × 2130 mm |
| Operating temperature | −35°C to +55°C |
| Operating altitude | ≤2000 m |
| Management protocol | OCPP 1.6J · optional OCPP 2.0.1 |
| Vehicle communication | ISO 15118-2 Plug & Charge · DIN 70121 |
| Metering accuracy | 1% · MID standard / Eichrecht optional |
Smart control and payment features
Supports AutoCharge, Plug & Charge, APP, RFID and QR authentication; card payments are optional. Cable management and remote OTA updates are supported. Payment terminals and operating platforms are activated for the selected configuration.
Two connectors do not mean maximum charger power simultaneously at each connector. Actual charging speed depends on the vehicle, power sharing and site supply. Specifications follow the IEC datasheet dated 16 June 2026; the manufacturer image is illustrative. Confirm final supply configuration and Australian applicability in the formal proposal.
Enquire about an Autel DH120 charging project ↗Power monitoring and mounting accessories
Schneider PowerLogic PM5320
Power and energy monitoring for commercial switchboards and compatible charging load management systems.
| Model | METSEPM5320 |
|---|---|
| Active energy accuracy | Class 0.5S · IEC 62053-22 |
| Harmonics | Up to 31st |
| Sampling | 64 samples/cycle |
| CT secondary input | 1 A / 5 A |
| Ethernet | 1 × RJ45 |
| Protocols | Modbus TCP/IP · BACnet/IP |
| Digital I/O | 2 DI / 2 DO |
| Memory | 256 kB |
| Alarms / tariffs | 35 alarms / 4 tariffs |
| Dimensions (W × H × D) | 96 × 96 × 72 mm |
| Weight / protection | 430 g · IP54 front / IP30 rear |
CT selection and control-system compatibility must be checked. A 1 A / 5 A input is the CT secondary rating, not the maximum site load. This meter does not independently regulate chargers or process payments.
Enquire about supply and installation ↗Schneider PowerLogic PM5560
Higher-accuracy monitoring with additional communications and logging for commercial energy management.
| Model | METSEPM5560 |
|---|---|
| Active energy accuracy | Class 0.2S · IEC 62053-22 |
| Harmonics | Up to 63rd |
| Sampling | 128 samples/cycle |
| CT secondary input | 1 A / 5 A |
| Ethernet | 2 × RJ45 · daisy chain |
| Serial interface | RS485 · Modbus RTU / ASCII |
| Network protocols | Modbus TCP/IP · BACnet/IP · DNP3 |
| Digital I/O | 4 DI / 2 DO |
| Memory | 1.1 MB |
| Alarms / tariffs | 52 alarms / 8 tariffs |
| Remote monitoring | Web server · email alarm notifications |
| Weight / protection | 450 g · IP54 front / IP30 rear |
Includes measured neutral current and an Ethernet/serial gateway. FH selects CTs and confirms the integration with the chosen load management platform.
Enquire about supply and installation ↗Autel AC Ultra mounting pedestal
A separate mounting accessory for one AC Ultra socket-version charger. The charger is not included.
| Part number | 106000729 |
|---|---|
| Dimensions (W × D × H) | 360 × 197 × 1440 mm |
| Material | SUS430 |
| Finish | Polyester anti-corrosion powder coating |
| Weight (unpackaged) | 26.4 kg |
| Weight (packaged) | 33.6 kg |
| Supported chargers | 1 × AC Ultra |
| Supplier warranty | 3 years |
This pedestal is for AC Ultra; compatibility with other chargers is not assumed. Foundation, anchors and cable routing are designed for the installation site.
Enquire about supply and installation ↗Tell us about your charging project
Send the site address, charger model and power rating, number of chargers, switchboard photos and approximate cable distance.
Request a quote ↗NSW business incentives
Official entry points reviewed on 11 October 2026. Confirm current availability and eligibility with the program provider before ordering or installing. FH links to these programs; an installation quote does not guarantee a subsidy.
EV Fleets Incentive: Kick-start Funding NSW
For eligible NSW fleets procuring battery electric vehicles and smart chargers. Checked 11 October 2026: closes 30 November 2026, or earlier if funding is exhausted. Check the official equipment criteria.
Official details and application process ↗NSW EV charging grants and programs
Explore fast charging, kerbside, apartment and fleet programs. Each round has its own application dates and availability.
Official details and application process ↗商用大功率充电桩 / Commercial high-power EV chargers
施工照片整理中 / Work photos coming soon.
查看照片展示页 / View photo gallery →ASP2 projects
Project photos coming soon.
All ASP2 projects →